Description
It is the ideal model for installations with long corridors given that it allows installation additional sensors DICROMAT SENSOR +.
- Additional sensors streamline, simplify and economize the installation, it is not necessary to buy or wire several DICROMAT +CR
- Also, DICROMAT 2 +CR 2 has two output contacts with different timings. It is deal for timing two circuits with one detector
- DICROMAT +CR has an input for push-button connection. Therefore it is also works as staircase timer. The operation of this input is independent of lighting conditions
- Optionally it can be programmed using the remote control MANDO CR
- Status LED that activates when the system detects motion
- Stepless dimming timing. Adjustable parameters : detection area, timing, and light sensitivity
- Zero-crossing relay for a better switching of LED-type loads, fluorescence or low energy lighting.
- Once installed it is not necessary to dismantle the unit for the adjustment of the parameters.
- Detection field limiter included, which allows detection cancellation in specific points within the detection area.
- Accessory: additional sensor DICROMAT SENSOR + remote control MANDO CR
- DICROMAT +CR allows up to 4 DICROMAT SENSOR +
- 230 VAC, 50 Hz
Max. Recomm. Load
- Incandescent Lamps: 2200W
- Fluorescent Tubes: 1200 VA
- Low Voltage Halogen (12V AC): 2000 VA
- Halogen (230V AC): 2200W
- Low Consumption Lamps (CFL): 1000VA
- LED Lamps: 500 VA
- Downlights: 900 VA
Extra Information
Brand:
ORBIS
Power supply:
230 V ac, 50 Hz
Switch capacity:
10A 230 V ac
Timing Circuit 1:
from 1s to 10 min
Timing Circuit 2:
from 10s to 15 min
Light sensibility:
adjustable from 2 to 2.000 lux
Circuit 2 of DICROMAT 2+ CR:
always reacts regardless of light setting
Operating Temp:
-10 ºC to +45 ºC
Detection angle:
360º
Detection field:
Up to 7m at 2.5m height